solder wire is experiencing popping or spattering during use

If solder wire is experiencing popping or spattering during use, you can take the following measures to address the issue:

1. Adjust the soldering temperature: Popping often occurs when the temperature is too high. Check the temperature settings of your soldering tool and ensure it’s within the appropriate range (generally between 320°C and 360°C).
2. Improve soldering technique: Control the soldering time to avoid overheating a single joint. Move the soldering iron quickly and evenly over the solder wire.
3. Check the quality of solder wire: Use high-quality solder wire, as poor-quality solder can lead to popping issues.
4. Reduce the amount of solder used: Using too much solder can cause it to splatter when melted. Use an appropriate amount of solder wire to ensure proper contact at the solder joint.
5. Keep the soldering area clean: Ensure that the soldering surfaces are free of oil, dirt, or oxidation, as these can affect the soldering process.
6. Use an appropriate flux: Flux helps the solder adhere better, ensuring a smoother soldering process.

If these measures do not resolve the issue, you may need to check other equipment settings or seek assistance from a professional.

Contact us by

Vivian Huang

General Manager—VIBGYOR

SHANGHAI VIBGYOR INDUSTRIAL CO,.LTD

WeChat: +86 150 2685 9051

WhatsApp : +86 150 2685 9051

Soldering & Lighting Factory Shanghai Vibgyor – We help Photoelectric manufacturing plant to obtain the best materials as quickly as possible. (electricalvibgyor.com)